NAME Async::Defer - VM to write and run async code in usual sync-like way VERSION This document describes Async::Defer version v1.0.1 SYNOPSIS use Async::Defer; # ... CREATE my $defer = Async::Defer->new(); my $defer2 = $defer->clone(); # ... SETUP $defer->do(sub{ my ($d, @param) = @_; # run sync/async code which MUST end with one of: # $d->done(@result); # $d->throw($error); # $d->continue(); # $d->break(); }); $defer->if(sub{ my $d=shift; return 1 }); $defer->try(); $defer->do($defer2); $defer->catch( qr/^io:/ => sub{ my ($d,$err) = @_; # end with $d->done/throw/continue/break }, qr/.*/ => sub{ # WILL CATCH ALL EXCEPTIONS my ($d,$err) = @_; # end with $d->done/throw/continue/break }, FINALLY => sub{ my ($d,$err,@result) = @_; # end with $d->done/throw/continue/break }, ); $defer->else(); $defer->while(sub{ my $d=shift; return $d->iter() <= 3 }); $defer->do(sub{ my ($d) = @_; # may access $d->iter() here # end with $d->done/throw/continue/break }); $defer->end_while(); $defer->end_if(); $defer->{anyvar} = 'anyval'; # ... START $defer->run(); DESCRIPTION WARNING: This is experimental code, public interface may change. This module's goal is to simplify writing complex async event-based code, which usually mean huge amount of callback/errback functions, very hard to support. It was initially inspired by Python/Twisted's Deferred object, but go further and provide virtual machine which allow you to write/define complete async program (which consists of many callback/errback) in sync way, just like you write usual non-async programs. Main idea is simple. For example, if you've this non-async code: $var = fetch_val(); process_val( $var ); and want to make fetch_val() async, you usually do something like this: fetch_val( cb => \&value_fetched ); sub value_fetched { my ($var) = @_; process_val( $var ); } With Async::Defer you will split initial non-async code in sync parts (usually this mean - split on assignment operator): ### 1 fetch_val(); ### 2 $var = process_val( $var ); then wrap each part in separate anon sub and add Defer object to join these parts together: $d = Async::Defer->new(); $d->do(sub{ my ($d) = @_; fetch_val( $d ); # will call $d->done('…result…') when done }); $d->do(sub{ my ($d, $var) = @_; process_val( $var ); $d->done(); # this sub is sync, it call done() immediately }); $d->run(); These anon subs are similar to statements in perl. Between these statements you can use flow control operators like if(), while() and try()/catch(). And inside statements you can control execution flow using done(), throw(), continue() and break() operators when current async function will finish and will be ready to go to the continue step. Finally, you can use Async::Defer object to keep your local variables - this object is empty hash, and you can create any keys in it. Single Defer object described this way is sort of single function. And it's possible to call another functions by using another Defer object as parameter for do() instead of usual anon sub. While you can use both sync and async sub in do(), they all MUST call one of done(), throw(), continue() or break() when they finish their work, and do this ONLY ONCE. This is Defer's way to proceed from one step to another, and if not done right Defer object's behaviour is undefined! PERSISTENT STATE, LOCAL VARIABLES and SCOPE There are several ways to implement this, and it's unclear yet which way is the best. We can implement full-featured stack with local variables similar to perl's local using getter/setter methods; we can fill called Defer objects with copy of all keys in parent Defer object (so called object will have full read-only access to parent's scalar data, and read/write access to parent's reference data types); we can do nothing and let user manually send all needed data to called Defer object as params and get data back using returned values (by done() or throw()). In current implementation we do nothing, so here is some ways to go: ### @results = another_defer(@params) $d->do(sub{ my ($d) = @_; my @params_for_another_defer = (…); $d->done(@params_for_another_defer); }); $d->do($another_defer); $d->do(sub{ my ($d, @results_from_another_defer) = @_; ... $d->done(); }); ### share some local variables with $another_defer $d->do(sub{ my ($d) = @_; $d->{readonly} = $scalar; $d->{readwrite} = $ref_to_something; $another_defer->{readonly} = $d->{readonly}; $another_defer->{readwrite} = $d->{readwrite}; $d->done(); }); $d->do($another_defer); $d->do(sub{ my ($d) = @_; # $d->{readwrite} here may be modifed by $another_defer $d->done(); }); ### share all variables with $another_defer (run it manually) $d->do(sub{ my ($d) = @_; %$another_defer = %$d; $another_defer->run($d); }); $d->do(sub{ my ($d) = @_; # all reference-type keys in $d may be modifed by $another_defer $d->done(); }); If you want to reuse same Defer object several times, then you should keep in mind: keys created inside this object on first run won't be automatically removed, so on second and continue runs it will see internal data left by previous runs. This may or may not be desirable behaviour. In later case you should use clone() and run only clones of original object (clones are created using %$clone=%$orig, so they share only reference-type keys which exists in original Defer): $d->do( $another_defer->clone() ); $d->do( $another_defer->clone() ); NESTED DEFERS Async::Defer objects can be nested, and there are two ways to do it. One way is to add a child defer to the parent defer using do() method. my $cd = Async::Defer->new(); ## setup the child defer. $cd->do( ... ); ## parent defer my $pd = Async::Defer->new(); $pd->do( ... ); $pd->do(sub { my $d = shift; ...; $d->done( @arguments_for_child_defer ); }); ## run the child defer $pd->do($cd); $pd->do(sub { my ($d, @results_from_child_defer) = @_; ...; }); The other way is to call run() on the child defer with its first argument being the parent defer. This is very useful when you dynamically create the child defer in statements of the parent defer. ## parent defer my $pd = Async::Defer->new(); $pd->do(sub { my ($d, @args) = @_; ## create the child defer in the statement my $cd = Async::Defer->new(); ## setup the child defer $cd->do( ... ); ## run() the child. ## You do not have to call $d->done explicitly, ## because the flow continues from the child to the parent. $cd->run($d, @argments_for_child_defer); }); $pd->do(sub { my ($d, @results_from_child_defer) = @_; ...; }); EXPORTS Nothing. INTERFACE GENERAL METHODS new $defer = Async::Defer->new(); Create and return Async::Defer object. clone $defer2 = $defer->clone(); Clone existing Async::Defer object and return clone. Clone will have same program (STATEMENTS and OPERATORS added to original object) and same local variables (non-deep copy of orig object keys using %$clone=%$orig). After cloning these two objects can be modified (by adding new STATEMENTS, OPERATORS and modifying variables) independently. It's possible to clone() object which is running right now, cloned object will not be in running state - this is safe way to run() objects which may or may not be already running. run $defer->run( $parent_defer, @params ); $defer->run( \&callback, @params ); Start executing object's current program, which must be defined first by adding at least one STATEMENT (do() or >) to this object. Usually while run() only first STATEMENT will be executed (with optional @params in parameters). It will just start some async function and returns, and run() will returns immediately after this too. Actual execution of this object will continue when started async function will finish (usually after Timer or I/O event) and call this object's done(), break(), continue() or throw() methods. It's possible to make all STATEMENTS sync - in this case full program will be executed before returning from run() - but this has no real sense because you don't need Defer object for sync programs. If run() used to start top-level program (i.e. without $parent_defer parameter), then there will be no return value at end of program - after break STATEMENT in this object will call done() nothing else will happens and any parameters of that break done() call will be ignored. If this Defer object was started as part of another program (i.e. it was added there using do() or just manually executed from some STATEMENT with defined $parent_defer parameter), then it return value will be delivered to continue STATEMENT in $parent_defer object (See "NESTED DEFERS"). The first argument for run() may also be a subroutine reference (\&callback). In this case, the callback is called after break STATEMENT in this object. The arguments for the callback are the results of the break STATEMENT. Any value returned from \&callback will be ignored. iter This method available only inside while() - both in while()'s \&conditional argument and while()'s body STATEMENTS. It return current iteration number for nearest while(), starting from 1. # this loop will execute 3 times: $d->while(sub{ shift->iter() <= 3 }); $d->do(sub{ my ($d) = @_; printf "Iteration %d\n", $d->iter(); $d->done(); }); $d->end_while(); STATEMENTS and OPERATORS All STATEMENTS methods return the Async::Defer object, so that you can chain method calls. do $defer = $defer->do( \&sync_or_async_code, … ); $defer = $defer->do( $child_defer, … ); Add STATEMENT to this object's program. When this STATEMENT should be executed, \&sync_or_async_code (or $child_defer's first STATEMENT) will be called with these params: ( $defer_object, @optional_results_from_previous_STATEMENT ) do() accepts multiple arguments. Those STATEMENTS are added to the object in that order, and can be mix of any types - i.e. it's same as call do() sequentially multiple times providing these arguments one-by-one. $defer->do( \&code1, $defer2, [$defer3, $defer4, \&code5], { task1 => $defer6, task2 => \&code7, }, \&more_code, ... ); $defer = $defer->do( [\&sync_or_async_code, $child_defer, ...], ... ); $defer = $defer->do( { task1 => \&sync_or_async_code, task2 => $child_defer, ... }, ... ) Add one STATEMENT to this object's program. When this STATEMENT should be executed, all these tasks will be started simultaneously (Defer objects using clone() and run(), code by transforming into new Defer object and then also run()). This program will continue only after all these tasks will be finished (either with done() or throw()). It's possible to provide params individually for each of these tasks and receive results/error returned by each of these tasks, but actual syntax depends on how these tasks was named - by id (ARRAY) or by name (HASH): $d->do(sub{ my ($d) = @_; $d->done( ['param1 for task1', 'param2 for task1'], ['param1 for task2'], [undef, 'param2 for task3'], # no params for task4,task5,… ); }); $d->do([ $d_task1, $d_task2, $d_task3, $d_some, $d_some ]); $d->do(sub{ my ($d, @taskresults) = @_; my $id = 1; if (ref $taskresults[$id-1]) { print "task $id results:", @{ $taskresults[$id-1] }; } else { print "task $id throw error:", $taskresults[$id-1]; } }); $d->do(sub{ my ($d) = @_; $d->done( task1 => ['param1 for task1', 'param2 for task1'], task2 => ['param1 for task2'], task3 => [undef, 'param2 for task3'], # no params for task4,task5,… ); }); $d->do({ task1 => $d_task1, task2 => $d_task2, task3 => $d_task3, task4 => $d_some, task5 => $d_some, }); $d->do(sub{ my ($d, %taskresults) = @_; if (ref $taskresults{task1}) { print "task1 results:", @{ $taskresults{task1} }; } else { print "task1 throw error:", $taskresults{task1}; } }); if else end_if $defer = $defer->if( \&conditional ); $defer = $defer->else(); $defer = $defer->end_if(); Add conditional OPERATOR to this object's program. When this OPERATOR should be executed, \&conditional will be called with single param: ( $defer_object ) The \&conditional MUST be sync, and return true/false. while end_while $defer = $defer->while( \&conditional ); $defer = $defer->end_while(); Add loop OPERATOR to this object's program. When this OPERATOR should be executed, \&conditional will be called with single param: ( $defer_object ) The \&conditional MUST be sync, and return true/false. try catch $defer = $defer->try(); $defer = $defer->catch( $regex_or_FINALLY => \&sync_or_async_code, ... ); Add exception handling to this object's program. In general, try/catch/finally behaviour is same as in Java (and probably many other languages). If some STATEMENTS inside try/catch block will throw(), the thrown error can be intercepted (using matching regexp in catch()) and handled in any way (blocked - if catch() handler call done(), continue() or break() or replaced by another exception - if catch() handler call throw()). If exception match more than one regexp, first successfully matched regexp's handler will be used. Handler will be executed with params: ( $defer_object, $error ) In addition to exception handlers you can also define FINALLY handler (by using string "FINALLY" instead of regex). FINALLY handler will be called in any case (with/without exception) and may handle this in any way just like any other exception handler in catch(). FINALLY handler will be executed with different params: # with exception ( $defer_object, $error) # without exception ( $defer_object, @optional_results_from_previous_STATEMENT ) FLOW CONTROL in STATEMENTS Unless you are nesting child defers, one and only one of these methods MUST be called at end of each STATEMENT, both sync and async! In the case of nested defers, see "NESTED DEFERS". done $defer->done( @optional_result ); Go to continue STATEMENT/OPERATOR. If continue is STATEMENT, it will receive @optional_result in it parameters. throw $defer->throw( $error ); Throw exception. Nearest matching catch() or FINALLY STATEMENT will be executed and receive $error in it parameter. continue $defer->continue(); Move to beginning of nearest while() (or to first STATEMENT if called outside while()) and continue with continue iteration (if while()'s \&conditional still returns true). break $defer->break(); Move to first STATEMENT/OPERATOR after nearest while() (or finish this program if called outside while() - returning to parent's Defer object if any). SUPPORT Bugs / Feature Requests Please report any bugs or feature requests through the issue tracker at https://github.com/powerman/perl-Async-Defer/issues. You will be notified automatically of any progress on your issue. Source Code This is open source software. The code repository is available for public review and contribution under the terms of the license. Feel free to fork the repository and submit pull requests. https://github.com/powerman/perl-Async-Defer git clone https://github.com/powerman/perl-Async-Defer.git Resources * MetaCPAN Search https://metacpan.org/search?q=Async-Defer * CPAN Ratings http://cpanratings.perl.org/dist/Async-Defer * AnnoCPAN: Annotated CPAN documentation http://annocpan.org/dist/Async-Defer * CPAN Testers Matrix http://matrix.cpantesters.org/?dist=Async-Defer * CPANTS: A CPAN Testing Service (Kwalitee) http://cpants.cpanauthors.org/dist/Async-Defer AUTHOR Alex Efros CONTRIBUTORS Toshio Ito toshioito [at] cpan.org COPYRIGHT AND LICENSE This software is Copyright (c) 2011- by Alex Efros . This is free software, licensed under: The MIT (X11) License